Uniden Cell Phone D1364BK User Manual

D1361/D1364 Series User's Guide  
What's in the box?  
You may also find:  
Accessory handset  
and charger  
D1361/  
D1364 base  
with Caller ID  
and cordless  
handset  
Not pictured:  
x Rechargeable  
battery (BT-1021)  
x Battery cover  
x AC adapter  
(PS-0035)  
If you purchased  
model number...  
D1364  
D1364-2  
You should have:  
Not pictured:  
x Rechargeable battery (BT-1021)  
x Battery cover  
x AC adapter (PS-0035)  
x Telephone cord  
None  
1 of each  
2 of each  
D1364-3  
x If any items are missing or damaged, contact our Customer Care Line  
immediately. Never use damaged products!  
x Call waiting, CID, CIDCW, and Voice Mail are telephone line services. Contact your  
provider for details.  
If You...  
Contact Uniden’s...  
Customer Care Line*  
Parts Department*  
Accessibility Help Line  
Phone Number  
817-858-2929 or  
800-297-1023  
800-554-3988  
800-874-9314  
(voice or TTY)  
have a question or problem  
need a part or an accessory  
need special assistance due to  
a disability  
* During regular business hours, Central Standard Time; see our website for detailed  
business hours.  
© 2012 Uniden America Corp.  
Ft. Worth, Texas  
Printed in Vietnam  
U01UN400EZA(0)  
GETTING STARTED  
Installing Your Phone  
Charge the Baꢂery  
1. Unpack the handset, battery pack, and battery  
cover. If you need to remove the cover, press in on  
the notch and slide the cover down and off.  
2. Line up the battery connector with the jack inside  
the handset; the connector only fits one way.  
3. Push the connector in until it clicks into place; tug gently on the wires to  
make sure the battery pack is securely connected.  
4. Replace the battery cover and slide it into place.  
5. Use the AC adapter to connect the power jack on the base to a regular  
indoor (120V AC) power outlet.  
6. Place the handset in the base with the display facing forward. If the display  
doesn’t light up, reseat the handset or connect the base to a different outlet.  
# Charge the handset completely (about 15 hours) before using.  
Connect the Telephone Cord  
1. Use the telephone cord to connect the TEL LINE jack on the base to a  
standard telephone wall jack.  
# If the display says Check TEL Line, check the connection between the  
base and the phone jack.  
2. If you are mounting the phone on the wall, place the mounting slots (on  
the rear of the base) over the pins on the wall plate; slide the base down to  
lock it into place.  
Test the Connecꢀon  
Make a quick test call. Pick up the handset and press TALk/FLASh. (Press ENd  
to hang up.)  
x If there’s a lot of noise, check for interference (see p. 10).  
x If you keep hearing a dial tone, change to pulse dialing (see below).  
Changing from Tone to Pulse Dialing  
Your phone uses tone dialing by default. If your phone company uses pulse  
dialing, you need to change your phone’s dial mode.  
1. Press MENu/SELECT and select Global Setup.  
2. Select Dial Mode then Pulse. You’ll hear a confirmation tone.  
To send DTMF tones during a call (e.g., for an automated response system),  
press to temporarily switch to tone dialing. When you hang up, the phone  
*
automatically returns to pulse dialing.  
English - 3  
GETTING TO KNOW YOUR PHONE  
Earpiece  
Status  
FIND  
HANDSET  
Display  
UP  
CLEAR  
MENU/SELECT  
PHONEBOOK/  
LEFT  
CALLER ID/LEFT  
END  
TALK/  
FLASH  
DOWN  
Twelve-  
key dial  
pad  
CHARGING  
CONTACTS  
Base  
REDIAL/  
PAUSE  
MESSAGES  
Key  
What it does  
MUTE  
Microphone  
FINd  
x In standby: page the handset.  
Charging  
contacts  
Handset  
Key (icon)  
What it does  
x In standby: increase the ringer volume.  
x During a call: increase the volume.  
up (  
)
x In any menu or list: move the cursor up one line.  
x When entering text or numbers: erase the character at the  
cursor (press and hold to erase all characters).  
CLEAr  
x In standby or during a call: open the phonebook.  
x In the menu: go back to the previous screen.  
phONEBOOk/LEFT  
(
)
x In standby: start a telephone call (get a dial tone).  
x During a call: switch to a waiting call.  
TALk/FLASh  
x In standby: open the redial list.  
x While entering a phone number: insert a 2-second pause.  
rEdIAL/pAuSE  
x During a call: mute the microphone.  
x While the phone is ringing: ignore this call (mute the  
ringer).  
MuTE  
4 - English  
Key (icon)  
MENu/SELECT  
CALLEr Id/rIghT  
ENd  
What it does  
x In standby: open the menu.  
x In any menu or list: select the highlighted item.  
x In standby or during a call: open the Caller ID list.  
x During a call: hang up.  
x In any menu or list: exit and go to standby.  
x In standby: decrease the ringer volume.  
x During a call: decrease the volume.  
dOwN (  
)
x In any menu or list: move the cursor down one line.  
x In standby: access your voice mail service.  
MESSAgES (  
)
LED  
What it means  
x On: the battery is charging.  
x Blinking: there are new messages.  
STATuS  
Reading the Display  
The icons appear based on what you're doing with the phone.  
Icon  
What it means  
Icon  
What it means  
You have a voice mail  
The battery is 1) fully  
charged, 2) half charged,  
3) getting low, or 4)  
empty.  
Enter 1) capital or 2) lower  
case letters.  
message.  
T-coil mode is on (see p. 6).  
The ringer is turned off and  
will not ring for new calls.  
[Aa] [aA]  
Entering Text on Your Phone  
x Use the 12-key dial pad anytime you want to enter text into your phone (e.g.  
a name in the phonebook).  
x If two letters in a row use the same key, enter the first letter; wait for the  
cursor to move to the next space and enter the second letter.  
To...  
Press...  
move the cursor left  
move the cursor right  
erase the character at the cursor  
erase the entire entry  
enter a blank space  
phONEBOOk/LEFT.  
CALLEr Id/rIghT.  
CLEAr.  
and hold CLEAr.  
#
.
English - 5  
To...  
Press...  
switch between upper and lower case letters  
rotate through the punctuation and symbols  
.
*
0
.
Using the Menu  
MENU/SELECT  
x If you don't press any keys  
for about thirty seconds, the  
handset exits the menu.  
Press  
to  
open the menu.  
MENU/SELECT  
the current option.  
Press  
to choose  
Handset Setup  
Date & Time  
Press  
Handset Setup  
T-coil  
PHONEBOOK  
Setup  
to  
UP  
Use and  
rotate through the  
options.  
DOWN  
to  
go back a screen  
OR  
Ringer Tones  
Setup  
END  
the menu.  
press  
to exit  
Auto Talk  
Handset Setup Menu  
Menu Option  
What it does  
Reduce noise on hearing aids equipped with a telecoil  
(T-coil) feature. It shortens talk time, so keep your battery  
fully charged.  
T-coil  
Choose the handset's ring tone. As you highlight each ring  
Ringer Tones  
AutoTalk  
tone, you hear a sample. To confirm, press MENu/SELECT.  
Have the handset answer a call when you pick it up from  
the cradle (without pressing any buttons).  
Have the handset answer a call when you press any key on  
the 12-key dialpad.  
Change the name used in the handset’s display.  
Any Key Answer  
Banner  
Handset Language Change the display language.  
Key Touch Tone  
Have the keypad sound a tone when you press a key.  
Date & Time Menu  
Use this menu to set the clock (if you have Caller ID, the phone sets date and time  
automatically). Enter the date and time; select AM or PM. Use CALLEr Id/rIghT  
to move the cursor past a digit without changing it. To confirm, press MENu/  
SELECT.  
6 - English  
Global Setup Menu  
Menu Option  
What it does  
Dial Mode  
Choose tone or pulse dialing (see p. 3).  
Program your voice mail access number so you can get  
messages by pressing one button (see p. 9).  
Reset the Visual Message Waiting Indicator (see p. 9).  
Edit Voice Mail  
VMWI Reset  
USING YOUR PHONE  
Basics  
To...  
Press...  
make a call, dial the number, and  
answer a call  
TALk/FLASh.  
TALk/FLASh.  
hang up  
ENd or put the handset in the cradle.  
MuTE while the phone is ringing.  
MuTE. (Press again to turn it back on.)  
ignore a call (mute the ringer)  
mute the microphone during a call  
Changing the Volume  
You can adjust the volume of the earpiece and ringer separately.  
To change the... When...  
Press...  
earpiece volume you are on a call  
ringer volume * the phone is in standby  
up to increase the volume or  
dOwN to decrease it.  
* To turn off the ringer, turn the ringer volume all the way down.  
Using the Phonebook, Caller ID, and Redial Lists  
x The phone can store up to 30 entries in its phonebook.  
x If you subscribe to Caller ID (CID) service, the phone stores the information  
for the last 30 received calls to the CID list. Contact your telephone provider  
for more information.  
x The handset remembers the last 5 numbers you dialed on it.  
To...  
Press...  
phONEBOOk/LEFT, CALLEr Id/rIghT, or  
rEdIAL/pAuSE.  
open the list  
scroll through the list  
dial the current entry  
up or dOwN.  
TALk/FLASh.  
English - 7  
To...  
Press...  
before dialing for a toll call.  
add 1 at the front of CID number  
add the area code  
*
#
before dialing.  
store the current CID or redial entry MENu/SELECT, then select Store Into PB.  
to the phonebook  
Proceed to edit the name and number.  
edit the current phonebook entry  
MENu/SELECT, then select Edit.  
MENu/SELECT, then select Delete (or  
delete the current entry  
close the list  
Delete Entry). To confirm, select Yes.  
phONEBOOk/LEFT.  
# When it’s in standby, the handset shows how many calls came in  
since the last time you checked the CID list.  
Adding Phonebook Entries  
With the phone in standby, open the phonebook. Press MENu/SELECT and then  
select Create New. Proceed to enter a name and number.  
x Enter the phone number (up to 20 digits) exactly as you would dial it.  
x If you need to enter a pause between the numbers, press rEdIAL/pAuSE; you’ll  
see a P in the display. (The dialing will pause for about 2 seconds per a digit.)  
x To edit the number, press CLEAr to back up the cursor and delete numbers.  
Re-enter the correct numbers.  
Deleꢀng All the Entries  
With the phone in standby, open the list (phonebook, CID, or redial). Press MENu/  
SELECT and then select Delete All. To confirm, select Yes.  
Chain Dialing  
If you often have to enter a series of digits or a code number during a call,  
you can save that code number as a regular phonebook entry and use the  
phonebook to send the code number.  
Make a call normally. When you hear the prompt that asks you to enter your  
number, open the phonebook and find the entry. Press MENu/SELECT to send  
the code. If you change your mind, just close the phonebook.  
Using Call Waiꢀng  
x Call Waiting, a service available from your telephone provider, lets you  
receive calls while you are on another call. Caller ID on Call Waiting  
(CIDCW) service displays Caller ID information for a waiting call.  
x If you get a Call Waiting call, the phone sounds a tone. Press TALk/FLASh to  
switch between the current call and the waiting call; each time you switch,  
there is a short pause before you’re connected to the other caller.  
8 - English  
Finding the Handset  
With the phone in standby, press FINd on the base. The handset will beep for 1  
minute. To cancel, press FINd again or press any handset key.  
Voice Message Noꢀficaꢀon  
If you subscribe to a voice mail service, your phone displays the voice  
mail icon (  
) when you have a new message. After you listen to your  
messages, the message icon turns off. If it doesn’t, you can reset it: With the  
phone in standby, open the menu and select Global Setup; select VMWI Reset,  
then select Yes.  
Seꢁng Up Voice Mail Access  
If you have voice mail access through your service provider, you can program  
that access number into your phone and then just press one key to dial -  
MESSAgES. You will set up an access code to your account, and you can  
either enter that manually after you have accessed the voice mail or you can  
program that into your phone, too.  
1. Press MESSAgES. If no voice mail access number has been set up, the system  
prompts you to do that now. (You can add the access number later; press  
MENu/SELECT then Global Setup/Edit Voice Mail.)  
2. Enter the provider’s voice mail access number. Press MENu/SELECT to set the  
number.  
3. The screen displays Done! and returns to the Global Setup menu.  
4. To access your provider’s voice mail service now, press MESSAgES. The  
system will dial the voice mail service and you can enter your security code  
manually when prompted.  
Ediꢀng Your Voice Mail Number  
You can add your voice mail security code to the voice mail number string.  
1. Press MENu/SELECT, then scroll to Global Setup/Edit Voice Mail.  
2. Enter your voice mail number again, then press rEdIAL/pAuSE twice to enter  
a 4-second pause. Next, enter your security code.  
3. Press MENu/SELECT when you are finished. The system displays Done! and  
returns to the Global Setup menu.  
4. To access your provider’s voice mail service now, just press MESSAgES.  
The system will dial the access number, wait 4 seconds, and then dial the  
security code.  
English - 9  
TROUBLESHOOTING  
Problems  
Possible solutions  
x Check the telephone cord connection.  
I can’t make or receive  
calls.  
x Disconnect the base AC adapter. Wait a few minutes,  
then reconnect it.  
x Make sure the base is plugged in.  
The handset won’t ring.  
x Make sure the ringer is turned on.  
x Charge the battery for 15-20 hours.  
x Check the battery connection.  
The handset is not  
working.  
x Let calls ring twice before answering.  
x Make sure your CID service is active.  
The handset won’t display  
CID information.  
x The battery is getting low. Check the handset for a low  
battery alert. Finish your conversation and return the  
handset to the cradle as soon as possible.  
I hear a beeping during  
a call.  
x Check for interference from appliances (microwave  
ovens, TVs, etc.) or wireless devices (baby monitors,  
WiFi equipment, etc.). Move the handset or base away  
from the interference source.  
There’s a lot of noise or  
static on the line  
x Move the handset closer to the base.  
x Turn the T-coil on for telecoil hearing aids (see p. 6).  
If the liquid is only on the exterior  
housing of the base or handset, wipe  
it off and use as normal. If you can  
hear liquid inside the housing:  
1. Remove all compartment covers,  
and disconnect all cables and  
cords.  
2. If liquid is leaking from any vent  
or hole, turn the phone so that  
vent faces down. If not, place the  
largest vent face down.  
3. Let dry for at least 3 days. Check  
for liquid inside the phone before  
replacing compartment covers  
and reconnecting cords.  
Installing a Line Filter or DSL  
Filter  
x A telephone line filter or DSL filter  
prevents services that use the phone  
line from causing interference on  
your phone. To get a line filter,  
contact your service provider or  
look in an electronics store.  
x Plug the filter into the telephone  
wall jack and plug the base into the  
filter. Make a test call to make sure  
the noise is gone.  
Liquid Damage  
CAUTION: If the base is covered in  
liquid, disconnect the adapter and  
phone cord from the wall before  
touching it.  
10 - English  
x As part of our commitment to protecting our  
environment and  
Adapter and Baꢂery Informaꢀon  
AC adapter  
conserving natural  
resources, Uniden  
Part number  
Input voltage  
PS-0035  
120V AC, 60 Hz  
voluntarily participates in  
an RBRC® industry  
program to collect and  
Output voltage 8V AC @ 300mA  
recycle used Ni-MH  
batteries within the  
Battery pack (with normal use)  
United States. Please call  
1-800-8-BATTERY for information on  
Ni-MH battery recycling in your area.  
(RBRC® is a registered trademark of the  
Rechargeable Battery Recycling  
Corporation.)  
Part number  
Capacity  
Talk time  
Standby time  
Battery life  
BT-1021  
300mAh, 2.4V DC  
about 7 hours  
about 6 days  
about 1 year  
Rechargeable batteries must be recycled  
or disposed of properly.  
Warning! The cords on this product and/  
or accessories contain lead, a chemical  
known to the state of California to cause  
birth defects or other reproductive harm.  
Wash hands after handling.  
Uniden works to reduce lead content in  
PVC coated cords in our products and  
accessories.  
x Use only the supplied AC adapter.  
x Use the proper adapter for the base.  
x Do not place the unit in direct  
sunlight or subject it to high  
temperatures.  
x Replace the battery when the talk  
or standby time becomes noticeably  
reduced. For replacements, call the  
Parts Department (see the front  
cover).  
Compliance Informaꢀon  
FCC Part 68 Informaꢀon  
This equipment complies with Part 68 of  
the FCC rules and the requirements adopted  
by the ACTA. On the bottom of this  
equipment is a label that contains, among  
other information, a product identifier in  
the format US: AAAEQ##TXXXX. If  
requested, this number must be provided to  
the phone company.  
An applicable Universal Service Order  
Codes (USOC) certification for the jacks  
used in this equipment is provided (i.e.,  
RJ11C) in the packaging with each piece  
of approved terminal equipment. A plug  
and jack used to connect this equipment to  
the premises wiring and telephone network  
must comply with the applicable FCC  
Part 68 rules and requirements adopted by  
the ACTA. A compliant telephone cord  
and modular plug is provided with this  
product. It is designed to be connected  
to a compatible modular jack that is also  
x When the battery gets low, the  
handset beeps or shows a low  
battery alert; put the handset in the  
cradle for recharging.  
Rechargeable Baꢂery Warning  
x This equipment contains a rechargeable  
Nickel-Metal-Hydride (Ni-MH) battery.  
x Nickel is a chemical known to the state of  
California to cause cancer.  
x Do not short-circuit the battery.  
x The batteries in this equipment may explode  
if disposed of in a fire.  
x Do not charge the batteries in any charger  
other than the one specified in the owner’s  
manual. Using another charger may damage  
the battery or cause it to explode.  
English - 11  
compliant. See installation instructions for  
details.  
If your home has wired alarm equipment  
connected to a phone line, be sure that  
installing the system does not disable your  
alarm equipment. If you have questions  
about what will disable alarm equipment,  
contact your telephone company or a  
qualified installer.  
Any changes or modifications to this  
product not expressly approved by the  
manufacturer or other party responsible for  
compliance could void your authority to  
operate this product.  
NOTICE: According to telephone company  
reports, AC electrical surges, typically  
resulting from lightning strikes, are very  
destructive to telephone equipment  
connected to AC power sources. To  
minimize damage from these types of  
surges, a surge arrestor is recommended.  
The REN is used to determine the number  
of devices that may be connected to a phone  
line. Excessive RENs on a phone line may  
result in devices not ringing in response  
to an incoming call. In most but not all  
areas, the sum of RENs should not exceed  
five (5.0). To be certain of the number of  
devices that may be connected to a line,  
as determined by the total RENs, contact  
the telephone provider. The REN for this  
product is part of the product identifier that  
has the format US:AAAEQ##TXXXX.  
The digits represented by ## are the REN  
without a decimal point (e.g., 03 is a REN  
of 0.3).  
If this equipment causes harm to the  
telephone network, the telephone company  
will notify you in advance that temporary  
discontinuance of service may be required.  
But if advance notice isn't practical, the  
telephone company will notify the customer  
as soon as possible. Also, you will be  
advised of your right to file a complaint  
with the FCC if you believe it is necessary.  
The telephone company may make changes  
in its facilities, equipment, operations or  
procedures that could affect the operation  
of the equipment. If this happens the  
telephone company will provide advance  
notice in order for you to make necessary  
modifications to maintain uninterrupted  
service.  
FCC Part 15 Informaꢀon  
This device complies with part 15 of the  
FCC rules. Operation is subject to the  
following two conditions: (1) This device  
may not cause harmful interference, and (2)  
This device must accept any interference  
received, including interference that may  
cause undesired operation. Privacy of  
communications may not be ensured when  
using this phone.  
FCC PART 15.105(b): Note: This  
equipment has been tested and found to  
comply with the limits for a Class B digital  
device, pursuant to part 15 of the FCC  
Rules. These limits are designed to provide  
reasonable protection against harmful  
interference in a residential installation.  
This equipment generates, uses and can  
radiate radio frequency energy and, if not  
installed and used in accordance with the  
instructions, may cause harmful interference  
to radio communications. However, there  
is no guarantee that interference will not  
occur in a particular installation. If this  
equipment does cause harmful interference  
to radio or television reception, which can  
be determined by turning the equipment  
off and on, the user is encouraged to try to  
correct the interference by one or more of  
the following measures:  
Please follow instructions for repairing,  
if any (e.g. battery replacement section);  
otherwise do not substitute or repair any  
parts of the device except as specified in this  
manual. Connection to party line service  
is subject to state tariffs. Contact the state  
public utility commission, public service  
commission or corporation commission for  
information. This equipment is hearing aid  
compatible.  
If you experience trouble with this  
equipment, contact the manufacturer or  
an authorized agent. If the equipment is  
causing harm to the telephone network, the  
telephone company may request that you  
disconnect the equipment until the problem  
is resolved.  
x Reorient or relocate the receiving antenna.  
12 - English  
x Increase the separation between the  
equipment and receiver.  
x Connect the equipment into an outlet on  
a circuit different from that to which the  
receiver is connected.  
x Consult the dealer or an experienced radio/  
TV technician for help.  
connected to a telephone interface. The  
termination on an interface may consist of  
any combination of devices subject only to  
the requirement that the sum of the Ringer  
Equivalence Numbers of all the devices  
does not exceed 5.  
Radio equipment  
The term IC before the radio certification  
number only signifies that Industry Canada  
technical specifications were met. Operation  
is subject to the following two conditions:  
(1) this device may not cause interference,  
and (2) this device must accept any  
interference, including interference that may  
cause undesired operation of the device.  
"Privacy of communications may not be  
ensured when using this telephone."  
RF Exposure Informaꢀon  
This product complies with FCC radiation  
exposure limits under the following  
conditions:  
x The base must be placed to allow a  
minimum of 20 cm (8 inches) between the  
antenna and all persons during normal  
operation.  
x The base must not be collocated or operated  
in conjunction with any other antenna or  
transmitter.  
x The handset is designed for body-worn  
operation and meets FCC RF exposure  
guidelines when used with any belt clip,  
carrying case, or other accessory supplied  
with this product. (All necessary accessories  
are included in the package; any additional  
or optional accessories are not required  
for compliance with the guidelines.) Third  
party accessories (unless approved by the  
manufacturer) should be avoided as these  
might not comply with FCC RF exposure  
guidelines.  
Warranty (1 Year, Limited)  
Evidence of original purchase is required  
for warranty service.  
WARRANTOR: UNIDEN AMERICA  
CORPORATION ("Uniden")  
ELEMENTS OF WARRANTY: Uniden  
warrants, for one year, to the original retail  
owner, this Uniden Product to be free from  
defects in materials and craftsmanship with  
only the limitations or exclusions set out  
below.  
WARRANTY DURATION: This warranty  
to the original user shall terminate and  
be of no further effect 12 months after the  
date of original retail sale. The warranty  
is invalid if the Product is (A) damaged or  
not maintained as reasonable or necessary,  
(B) modified, altered, or used as part of  
any conversion kits, subassemblies, or  
any configurations not sold by Uniden,  
(C) improperly installed, (D) serviced  
or repaired by someone other than an  
authorized Uniden service center for a  
defect or malfunction covered by this  
warranty, (E) used in any conjunction  
with equipment or parts or as part of any  
system not manufactured by Uniden, or (F)  
installed or programmed by anyone other  
than as detailed by the owner's manual for  
this product.  
Industry Canada (I.C.) Noꢀce  
Terminal equipment  
NOTICE: This equipment meets the  
applicable Industry Canada Terminal  
Equipment Technical Specifications. This  
is confirmed by the registration number.  
The abbreviation IC before the registration  
number signifies that registration was  
performed based on a Declaration of  
Conformity indicating that Industry Canada  
technical specifications were met. It does  
not imply that Industry Canada approved  
the equipment.  
NOTICE: The Ringer Equivalence Number  
(REN) for this terminal equipment is  
marked on the equipment itself. The REN  
assigned to each terminal equipment  
provides an indication of the maximum  
number of terminals allowed to be  
STATEMENT OF REMEDY: In the event  
that the product does not conform to this  
English - 13  
warranty at any time while this  
warranty is in effect, warrantor will  
either, at its option, repair or replace  
the defective unit and return it to you  
without charge for parts, service, or  
any other cost (except shipping and  
handling) incurred by warrantor or  
its representatives in connection with  
the performance of this warranty.  
Warrantor, at its option, may replace  
the unit with a new or refurbished  
unit. THE LIMITED WARRANTY  
SET FORTH ABOVE IS  
PROCEDURE FOR OBTAINING  
PERFORMANCE OF  
WARRANTY: If, after following the  
instructions in the owner's manual  
you are certain that the Product  
is defective, pack the Product  
carefully (preferably in its original  
packaging). Disconnect the battery  
from the Product and separately  
secure the battery in its own separate  
packaging within the shipping  
carton. The Product should include  
all parts and accessories originally  
packaged with the Product. Include  
evidence of original purchase and a  
note describing the defect that has  
caused you to return it. The Product  
should be shipped freight prepaid, by  
traceable means, to warrantor at:  
Uniden America Service  
THE SOLE AND ENTIRE  
WARRANTY PERTAINING  
TO THE PRODUCT AND IS  
IN LIEU OF AND EXCLUDES  
ALL OTHER WARRANTIES OF  
ANY NATURE WHATSOEVER,  
WHETHER EXPRESS, IMPLIED  
OR ARISING BY OPERATION  
OF LAW, INCLUDING, BUT  
NOT LIMITED TO ANY  
4700 Amon Carter Blvd.  
Fort Worth, TX 76155  
As an Energy  
IMPLIED WARRANTIES OF  
MERCHANTABILITY OR  
Star® Partner,  
Uniden has  
FITNESS FOR A PARTICULAR  
PURPOSE. THIS WARRANTY  
DOES NOT COVER OR PROVIDE  
FOR THE REIMBURSEMENT OR  
PAYMENT OF INCIDENTAL OR  
CONSEQUENTIAL DAMAGES.  
Some states do not allow this  
determined that  
this product  
meets the  
Energy Star®  
guidelines for energy efficiency.  
Energy Star® is a U.S. registered  
mark.  
exclusion or limitation of incidental  
or consequential damages so the  
above limitation or exclusion may  
not apply to you.  
x Uniden® is a registered trademark of  
Uniden America Corporation.  
x The pictures in this manual are for  
example only. Your phone may not  
look exactly like the pictures.  
LEGAL REMEDIES: This warranty  
gives you specific legal rights, and  
you may also have other rights  
which vary from state to state. This  
warranty is void outside the United  
States of America and Canada.  

Sony Xplod CDX M800 User Manual
Sony J 10 User Manual
Sony D FJ401 User Manual
Silicon Laboratories SI5375 User Manual
Seagate ST3160215SCE User Manual
Sanyo MM 8300 User Manual
RCA GES050 User Manual
Onkyo MD 105X User Manual
Nokia Prism 7900 User Manual
Nokia 6230 User Manual